Insert elements are available in many different diameters. The FE 400 Z, FE 400 Z2 and FE 8000 Z series are equipped with a tension spring. The FE 400 M series has a meander spring. Insert elements are designed for installation on hardened and ground connecting parts. They are suitable for either oil or grease lubrication. All insert elements can be used as indexing clutches, backstops or as overrunning clutches.

Product features FE 400 Z

• Installed width: 12 mm
• Operating temperature: max. 140 °C (higher temperatures on request)
• Indexing frequency: max. 10 Hz
• Lubrication: oil or grease lubrication, delivered with corrosion protection, pre-greased on request

The FE 400 Z series contains freewheel clutch insert elements with tension springs.

FE 400 Z

Product features FE 400 M

• Installed width: 12 mm
• Operating temperature: max. 170 °C
• Indexing frequency: max. 60 Hz
• Lubrication: oil or grease lubrication, delivered with corrosion protection, pre-greased on request

The FE 400 M series contains freewheel clutch insert elements with meander springs.

FE 400 M

Product features FE 400 Z2

• Installed width: 7 mm
• Operating temperature: max. 140 °C (higher temperatures on request)
• Indexing frequency: max. 10 Hz
• Lubrication: oil or grease lubrication, delivered with corrosion protection, pre-greased on request

The FE 400 Z2 series contains freewheel clutch insert elements in narrow design with tension springs.

FE 400 Z2

Product features FE 8000 Z

• Installed width: 16 / 19 / 25 mm
• Operating temperature: max. 170 °C
• Indexing frequency: max. 5 Hz
• Lubrication: oil or grease lubrication, delivered with corrosion protection, pre-greased on request

The FE 8000 Z series contains freewheel clutch insert elements with tension springs.

FE 8000 Z